02984_0001.tif i
i
Jul, 6. 2015 2:17PM No. 6507 P. 1
INTERNAT RESIDENTI
CITY t REROOFI CHECKOFF SHEET
Return to Blair City Hall prior to Final Inspection
218 B I Street, Blair, NB 68008
13ecause of limitations caused by the infeasibility to perform detailed inspections which would
not interfere with reroofing work, please indicate compliance with the following f irements
following this reroofing job. _�
Property Address: L ZI .
Contractor or Homeowner (if self) IYA2
hermit #: MS -20 0 , 2 ' Z ( 4
Installation Date: 2f p !
YES
The materials and methods of application used for recovering or replacing the existing
roof covering comply with the requirements of the building cone. (8907.1)
ICE PROTECTION INSTALLER An ice barrier that consists of at least two layers of
underlayment or of a self - adhering polymer modified bitumen sheet was installed and
extends at least from the eave's edge to a point at least 24 inches inside the exterior
wall line of the building. (R905.21.1)
STRUCTURAL COMPONENTS ARE OUND, The structural roof components are
capable of supporting the roof covbri►1g system and the material and equipment loads
that will be encountered during Installation of the roof covering system, (R907.2)
i
EXISTING COVERING WAS REMOVED: Existing roof covering was removed for one
of the reasons required by section 8907.3
0 CT DID NO USE RUST1 =1) METAL OR FLASHING: Existing vent flashing, metal edges,
drain outlets, collars or metal counter - flashing were not reinstalled if rusted. (8907.5) j
. I
FLASHING INSTALLED PROPERLY: Flashing shall be reconstructed in accordance
With approved manufacturer's installation instructions. Metal flashing to which
bituminous materials are to be adhered shall be primed prior to installation. • (R907.6)
1
Signature Pr' a Steller date
Date
Signature of Permit Holder
I