Checkoff Sheet MS-2014-01774_0001.tif I
I
2UUV INTERNATIONAL, RESIDENTIAL CODE
MY" G, , kOFF SHE F,-T,
0F.SLAOR RERO G'CHE
PFI"N,"
etulrn o h air �IIt s l� or to inaI p
etsad ion
218 S 8 Street, Blair, NE 88008
Because of limitations caused,by.the infeasibility to. perform detailed inspections which would
not interfere with reroofing work 'piIease indicate compliance with the following` requirements
following thls� reroofing job,
Property Ad die ss » `fe T�
Contrector or Homeowner (if self) ,:
Permit #, MS-2014-1 I
v _
Insta I Iatioln Date. -
YE6 Na
❑
'' he Materials and methods of,application used.fer recover €ng o replacing the : existing
roof covering comply with the regtu rements 6 the b I ding code. `(11907.1)
❑
ICE PROTECTION INSTALLED An ice barrier that consists of at least two layers of
underlaymentor of a self-adhering polymer modified; bitumen sheet was installed and
extends zt Ieast from the eave's edge to a point at least 24 Inches inside the exterior
wall line of.the building. (R906.2.7.1)
❑ stPUd�TURAL COMP4N15 TS ;ARE SOUND: The structural'roof components are
capable of supporting the.roof covering, system and the material and equipment loads
that will be ericouhtered d installation of the roof covering system, (R907.2)
EXISTING COVERING WAS REMOVED. Existing roof covering was removed for one
of the reasons required by section 8907,3
DID NOT USE RUSTED METAL. 011 FLASHING. EkIstincg vent flashing' metal edges,
drain outlets, collars or metal counter flashing were not reinstalled if rusted. (R007.5)
❑ FL.ASHING INSTALLED PROPERLY. Flashing shall be reconstructed in accordance
with approved manufacturer's installation instructions. Metal flashing to which
bituminous materials are to be adhered shall be primed prior to installation. (R907.6)
4
T
/
�
Signa ure of Primary Installer Date
Si ature of Permit Holder Date