Checkoff Sheet MS-2014-00391_0001.tif i
Sep, 12. 2014 2,22P No, 0240 P, 1
CI TY a
Return to Blair Cltyr Hall prl& to Final lnspectlan
218 '16 S treet, lair,-NE 6888
Because of limitations caused by the Infeasibility to perform detailed Inspections which would
not interfere with reroofing work, phase indicate compliance with the following requirements
following this reroofing job.
Property Address: ,21- v/1-
Contractor or Homeowner (if self) : 1
Permit #: MS-2'014 ,
Installation Date: f
YES NO
The materials and methods of application used for recovering or replaging the existing
roof covering comply with the requirements of the building code. (8907.1)
I
ICE PR0fECTION INSTALLED An ice barrier that cdnsists of at least two layers of
underlaymernt or of a self-adhering polymer modified bitumen sheet was installed and
extends at least from the eave's edge to -a point at least 24 inches inside the exterior
wall line of the building. (11905.27.1)
STRUCTURAL COMPONENTS ARE SOUNIY: The structural roof components are
capable of supporting the roof covering systern' and the material and equipment loads
that will be encountered during installation of the roof covering system, (R907.2)
EXISTING COVERING WAS REMOVED: Existing roof covering was removed for one
of the reasons required by section R907.3
Dill NOT USE RUSTED MBTAL OR FLAStiiNG- Existing vent flashing, metal edges,
drain outlets, collars or metal counter - flashing were not reinstalled if rusted. (R907.5)
FLASHING INSTALLED PROPERLY, Flashing shall be reconstructsd in accordance
with approved manufacturer's installation instructions. Metal flashing to which
bituminous materials are to be adhered shall be primed prior to installation. (8907,0)
4 &gna re of P ri nst er ate
re of Permit older Date
`� L 1 1