Checkoff Sheet MS-2014-00557_0001.tif ep 06 14 11:08a Dave Cerise 402 -427 -7414 p.1
INTERNATIONAL TI
C ITY OF BLAIR REROOFIN HECK FF SHEET
Return to Blair C Hall prior to Final inspection
218 S 16 Street, Blair, NE 68008
Because of limitations caused by the infeasibility to perform detailed inspections which would
not interfere with reroofing work, please indicate compliance with the following requirements
following this reroofing job.
Property Address; \7 ON
Contractor or Homeowner (if self)
Permit #: MS- 2014- 00s
Installation Date:
YES NO
❑ The materials and methods of application used for recovering or replacing the existing
roof covering comply with the requirements of the building code. (R907.1)
Q ICE PROTECTION INSTALLED An ice barrier that consists of at least two layers of
underlayment or of a self-adhering polymer modified bitumen sheet was installed and
extends at least from the eave's edge to -a point at least 24 inches inside the exterior
wall line of the building. (R905.2.7.1)
I� STRUCTURAL COMPONENTS ARE SOUND: The structural roof components p nts are I
capable of supporting the roof covering system and the material and equipment loads
that will be encountered during installation of the roof covering system. (R907.2)
EXISTING COVERING WAS REMOVED: Existing roof covering was removed for one
of the reasons required by section R907.3
® DID NOT USE RUSTED METAL OR FLASHING: Existing ent flashing, edges,
g g, es 9
drain outlets, collars or metal counter- flashing were not reinstalled if rusted. (R907.5)
. 1 U FLASHING INSTALLED PROPERLY: Flashing shall be reconstructed in accordance
with approved manufacturer's installation instructions. Metal flashing to which
bituminous materials are to be adhered shall be primed prior to installation. (R907.6)
Signature of Primary Installer Date
Signature of Permit Holder Date