Checklist MS-2014-02023.tif i
I
f
a r
2009 INTERNATIONAL RESIDENTIAL CODE
C ITY OF BLAI R'REROOFING
R eturn to Bl City Hall prior to Final inspection
218 S 18 Street, Blair, NE 68008 s
Because of limitations caused by the infeasibility to perform detailed inspections which would
not interfere with reroofing work, prase indicate compliance with the following requirements
follbwin this reroofing job,
e f7>
Permit #:
i
y �
i f
Installation Date:
YES NO
The materials and methods of application used for recovering or replacing the existing
roof covering comply With the requirements of the building code. (R907.1)
ICE
PROTECTION INSTALLED: An ice barrier that consists of at least two layers of
underlayrnent or of a self- polymer modified bitumen sheet gas installed and
ds at least from the eave's ed st 24 inches l the exterior
exte a to a point at lea wall line of the building, (R905.2.7 )
STRUDTURAL CC31VlPt3NENTS ARE SOUND; The structural roof components are
capable of supporting the roof covering system and the material and equipment loads
that will be encountered during installation of the roof covering system. {R907,}
f
, r
COVERING WAS
REMOVED: Existing roof covering was removed for one
EXIST]i�lG GO I
of the reasons required by section R - 907,3
i
. drain
No RUSTED METAL OR FLASHINg. Existing vent flashing, metal edges ..,
outlets, collars or metal counter-flashing were not reinstalled if rusted, (R907.5) 3
r
t
FLASHING INSTALLED PROPERLY Flashing shall be reconstructed in accordance
w1th approved manufacturer's Installation instructions. Metal flashing to which
bituminous materials are to be adhered shall be primed prior to installation. (R907.6)
`
L
Sigma 'e of Prim nr
staller Date 3
J
S�gna re of Par Molder Date
{ 4 {
f.
t
E -
2009 4
CITY OF BLAIR REROOFING CHECKO SHEET '
Return to Blair City/ Hall prior to Final Inspection
21 8 S 16 Street, Blair, NE 68808
Because of limitations caused by the infeasibility to'perform detailed inspections which would
not interfere with reroofing work, please indicate compliance with the following requirements
following. this reroofing job.
Permit D 2 �J P (
C) \LA
Installation Date:
YES, NO
The materials and methods of application used for recovering or replacing the existing
roof covering comply with the requirements of the building code. (R907.1)
ICE PROTECTION INSTALLED: An ice barrier that consists of at least two layers of
underlayment or of a self- adhering polymer modified bitumen sheet was installed and
extends at least from the eave's edge to a point at least 24 inches inside the exterior
wail line of the building. (8905.2.7.1)
[� STRUCTURAL COMPONENTS ARE SOUND: The structural roof components are
capable of supporting the roof covering system and the material and equipment loads
that will be encountered during installation of the roof covering system. (8907.2)
(� EXISTING COVERING WAS REMOVED: Existing roof covering was removed for one
of the reasons required by section R907.3
NO RUSTED METAL OR FLASHING: Existing vent flashing, metal edges, drain
outlets, collars or metal counter were not reinstalled if rusted. (8907.5)
FLASHING INSTALLED PROPERLY: Flashing shall be reconstructed in accordance
with approved manufacturer's installation instructions. Metal flashing to which
bzrylnstaller terials are to be adhered shall be primed prior to installation. (8907.6)
dl� ig
Date
ej
J PV U1 I o er Date