Checklist MS-2014-00812.tif 1
r
i
2009 INTERNATIONAL RESIDENTIAL CODE -
C
C I T Y OF BLAI
Return
to Blair C it Hall'priorto Final inspection
2'18 S '16 th St r eet, Bla NB 68 008
Because of limitations itations caused by the infeasibility to'perform detailed inspections which would
not interfere with reroofing work, please indicate compliance with the following requirements
following this reroofing job.
Permit #: ( �
Installation Date:
YES NO
t The materials and methods of application used for recovering or replacing the existing
roof covering comply with the requirements of the building code. (R907.1)
[� ICE PROTECTION INSTALLED: An ice barrier that consists of at least two layers of
modified bitumen sheet was installed and
underlayment or of aself- adhering polymer
extends at least from the eave's edge to a point at least 244 inches inside the exterior
wall line of the building. (R905.2.7.1)
STRUCTURAL COMPONENTS ARE SOUND The structural roof components are
capable of supporting the roof co vering system and the material and equipment loads
. o g y
that will be encountered during installation of the . roof covering system. (R907.2)
„ SING
IN
COVERG WAS REMOVED: Existing roof covering was removed for one
� EXIT .
of the reasons required by section R907.3
NO RUSTED METAL OR FLASHING: Existing vent flashing, metal edges, drain
outlets, collars or metal counter-flashing were not reinstalled if rusted. (R907.5)
PLASHING INSTALLED PROPERLY: dashing shall be reconstructed in accordance
with approved manufacturer's installation instructions. fetal flashing to which
bituminous materials are to be adhered shall be primed prior to installation. (8907.6)
r Installer Date
Si nature of Permit Ho er Date
g