1015 S Hwy 30.tif 1,
_ / � MF -9506
1 = _ Medium -Gain Half- Parabolic Antenna
SCALA DIVISION
{
The Kathrein -Scala Miniflector is a medium -gain half - parabolic
antenna designed for fixed - station radio systems.
l
• Heavy -duty construction of anodized aluminum pipe, tubing
and castings plus stainless steel hardware and fastenings for i ;+
corrosion resistance.
• The feed assembly is foam - potted and sealed for maximum J 1
reliability in severe environments.
S pecifications:
Frequency range 940 -960 MHz
Gain 16 dBi (14 dBd)
Impedance 50 ohms
210' 9V'
VSWR < 1.3:1
Polarization Vertical
Front -to -back ratio >23 dB
Maximum input power 100 watts (at 50 °C)
H -plane beamwidth 16 degrees (half - power) H -plane
E -plane beamwidth 34 degrees (half - power) Horizontal pattern — V- polarization
Connector N female
Weight 13 lb (5.9 kg)
Dimensions 44.9 x 17.8 x 16.8 inches
(1140 x 451 x 428 mm)
Wind load at 93 mph (150kph)
Front/Side 50 Ibf / 28 Ibf
(222 N) / (121 N) 2 '
Wind survival rating* 120 mph (200 kph)
Shipping dimensions 47 x 18.5 x 16.5 inches z�
(1194 x 470 x 419 mm) s
Shipping weight 20 lb (9.1 kg) N A�
Mounting Mounting kits available for masts of 2.375 E -plane
to 4.5 inch (60 to 114 mm) OD. Vertical pattern — V- polarization
See reverse for order information.
* Mechanical design is based on environmental conditions as stipulated in
TIA- 222 -G -2 (December 2009) and /or ETS 300 019 -1 -4 which include
the static mechanical load imposed on an antenna by wind at maximum
velocity. See the Engineering Section of the catalog for further details.
TIN
I
i
Lead -Free MINIFLECTOR is a registered trademark of Kathrein Inc., Scala Division.
10045 -J
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779 -6500 Fax: (541) 779 -3991 j
Email: communications @kathrein.com Internet: www.kathrein- scala.com
I
_ r MF -9506
- Medium -Gain Half- Parabolic Antenna
ALA DIVI
i
16.8 inches
(428 mm)
�vv
44.9 inches
(1140 mm) —� (vertically polarized)
17.8 inches
(451 mm)
MKPX -2 Mounting Kit
Mounting Options:
Model Description
MKPX -2 Mounting Kit for 2.375 inch
(60 mm) OD mast.
MKPX -3 Mounting Kit for 2.875 inch
(73 mm) OD mast.
MKPX -4 Mounting Kit for 3.5 inch
(89 mm) OD mast.
MKPX 5 Mounting Kit for 4 inch
(102 mm) OD mast.
MKPX -6 Mounting Kit for 4.5 inch
(114 mm) OD mast.
i
I
I
I
Order Information:
Model Description
MF -950B Half- parabolic antenna
with N connector
All specifications are subject to change without notice. The latest specifications are available at www.kathrein- scala.com.
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779 -6500 Fax: (541) 779 -3991
Email: communications @kathrein.com Internet: www.kathrein - scala.com
3
° TY -900
M91TH ltllt2 Yagi Antenna
SCALA DIVISION
The Kathrein -Scala TY series are rugged broadband yagi antennas
fabricated of 6061/T6 aluminum rod and seamless drawn pipe,
anodized for maximum reliability and corrosion resistance. The
hardware and fastenings are stainless steel. The internal balun,
coax feed and connector are sealed in a foam potting system
to prevent moisture penetration and assure long service life in r
severe environmental conditions. The heavy aluminum mounting
casting allows installation for V or H polarization. `
• The TY 900 is specifically designed for professional fixed - station
applications in the 890 -960 MHz band.
(Shown vertically polarized)
I
S pecifications:
Frequency range 890 -960 MHz °
Gain 12 dBi
Impedance 50 ohms
VSWR < 1.5:1 maximum (1.35:1 typical)
I
Polarization . Horizontal or vertical 270
Front -to -back ratio >20 dB
Maximum input power 100 watts (at 50 °C)
H -plane beamwidth 48 degrees (half - power)
E -plane beamwidth 40 degrees (half - power)
Connector N female H plane
Weight 31b 1.4 k Horizontal pattern —V- polarization
Wei
9 ( g) Vertical pattern — H- polarization
Dimensions 23 x 7 inches (584 x 178 mm)
Wind load at 93 mph (150kph)
Front/Side 3 Ibf / 4 Ibf
(11 N) / (17 N)
Wind survival rating* 150 mph (240 kph)
Shipping dimensions 28 x 10 x 4.5 inches
(710 x 254 x 114 mm)
Shipping weight 5.0 lb (2.3 kg)
Mounting For masts of 1.25 to 2.375 inch
(32 to 60 mm) OD.
See reverse for order information. E -plane
Horizontal pattern — H- polarization
* Mechanical design is based on environmental conditions as stipulated Vertical pattern —V-polarization
in TIA- 222 -G -2 (December 2009) and /or ETS 300 019-1-4 which include
the static mechanical load imposed on an antenna by wind at maximum
velocity. See the Engineering Section of the catalog for further details.
O TCY
i
i
10065 -E
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779 -6500 Fax: (541) 779 -3991
Email: communications@kathrein.com Internet: www.kathrein- scala.com
TY -900
Yagi Antenna
CALA DIVISION
i
23 inches
(584 mm) j
0 07 (
i
i
I
7 inches
° (178 mm)
I
Order Information:
Model Description
TY 900 Yagi antenna with N connector
All specifications are subject to change without notice. The latest specifications are available at www.kathrein- scala.com.
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779 -6500 Fax: (541) 779 -3991
Email: communications @kathrein.com Internet: www.kathrein- scala.com