pb-2011-00260_0003.jpg Wick Buildin4s Reference Manual Material Specifications
Gable Pitched Buildings
w ,
s
Spacing • Other 1' -0" increments up to 12'. Check
• /B' on center bays. pages RC -1 – RC -3 in Roof Construction
section for truss requirements.
Footings • Other poured sizes to be code compliant.
• 4' – 60' span = 3' /2" x 14" precast concrete. Refer to Footing Size Design, Page FD -8
•
63'– 90' span = 6" x 18" poured concrete. Builder to provide with material in Foundation section.
only buildings.
Sidewall Columns • Larger sizes.
• All CCA treated to .6 # /ft see chart on next page). • Solid sawn columns.
Endwall Columns • Larger sizes.
• 24' – 90' span = 3 ply 2x6 standard laminated column. • Solid sawn columns.
Treated Uplift Anchors • 1 /2" rebar and 80# Ready- Crete.
Two treated blocks per column.
Treated Plank N/A
• 2x8 S4S #1 SYP AWPA treated for ground contact
Guts M -23 SYP
2x6 1650 MSR SPF
• RLC -F, SLC -I and others. Refer to Roof
asses
SLC -F. Construction section or Technical Sales
• SSG � '
for designs.
Truss -to- Column Connection • Two (2) 3 /4" bolts versus 1 /2" standard.
L' • Two 2 1 /2" bolts w/ eight 8 16d nails. Truss center - notched into column.
veled Purlin N/A
• 2x6 beveled eave purlin.
urlins • 2x4 at other centers.
• All 2x4 MSR 1650 (SPF) purlins @ 24 on center. • 2x4 using other species.
• 2x6 dropped between trusses.
Z- Corner Bracing • — Option to add on Wand 9' ICH's.
• — 2x4 corner braces none required on B'or 9'interior dear heights ). • Convert to M's.
Knee Bracing (Refer to bracing note on previous page.) . Option to add 2x6 @ 45
• None required,
ower Chord Stabilizers
• 2x4. N/A
Wind Bracing (roof line) • Option to add on 24', 27', 30' and 36'
• 2x4 wind braces (None required on 24', 27', 30', and 36' spans.) (Refer to spans.
drawing on next pa ,7e.) • Option to increase to heavier bracing.
Wick Panel (steel)
• Roof and sides 29 gauge steel grade E, G -90 galvanized, 1 -1/2 mil Ceram -
A -Star siliconized polyester paint system.
One -piece metal roofing panels, up to 36' max. length. (i.e., 66' span with
a 12" overhang.) • 29 gauge Acrylume
All one -piece metal roofing panels and sidewall panels are fastened with 1" • Wood sidings and shingled roof.
#9 Woodgrip screws.
All metal roofing panels which are two -piece and greater are fastened with
1 -1/2" Woodgrip screws.
Screw lengths are adjusted accordingly for panels placed over insulation.
Slide Doors 42WD wood frame (with or without 5'x5'
• Steel frame. tempered lass.
4" added to the nominal ICH to provide for optional concrete flooring. N/A
Spans . Any size above, below or in between.
• 24' 27 30' 6' 40' 42' 45' 48' 51' 54' 60' 63', 66' 69' 72' 81' 90'
Pi
• 3/12 ` .5/12 4/12 •Higher or lower, including attic trusses.
I
• r
8'-4',9'-4", 10' -4 ", 11'-4" 12'-4", 13' -4 ", 14' -4 ", 15' -4 ", 16' -4 ", 17' -4 ", 18' -4 ", • Other 1' increments.
19'-4" 20' -4"
Length Adjustable length by bay size to required
• Standard is a 72' base. length.
Page CE -3 February 2011