ac-2011-00104_0005.jpg Wick Builrlinas Reference Manual ` Material Specifications
Gable Pitched Buildings � i' ]/V
Spacing • Other 1' -0" increments up to 12'. Check
9' on center bays. pages RC -1 - RC -3 in Roof Construction
section for truss requirements.
Footings • Other poured sizes to be code compliant.
• 24' - 60 span = 3' /2 x 14 recast concret Refer to Footing Size Design, Page FD -8
• 63' - 90' span = 6" x 18" poure concrete, Builder to provide with material in Foundation section.
onl
idewall Columns • Larger sizes.
• All CCA treated to .6 # /fe see chart on next a e . • Solid sawn columns.
Endwall Columns • Larger sizes.
• 24' - 90' s an = 3 1 2x6 standard laminated column. • Solid sawn columns.
Treate c ors • 1 /2" rebar and 80# Ready Crete.
• o treated blocks er column.
Treated Plank N/A
2x8 S45 Al SYP AWPA treated for ground cont
Girts M -23 SYP
• 2x6 1650 MSR SPF
Trusses y� • RLC -F, SLC -I and others. Refer to Roof
�`xC 0- Construction section or Technical Sales
• SLC -F. for designs.
Truss -to- Column Connection
. Two 2 1 /2" bolts w eight 8 16d nails. Truss center - notched into column. 'Two (2) 3 /a bolts versus �/2" standard.
Beveled Purlin N/A
2x6 beveled eave purlin.
• 2x4 at other centers.
Purlins • 2x4 using other species.
• All 2x4 MSR 1650 (SPF) purlins @ 24 on center. • 2x6 dropped between trusses.
Corner Bracing • — Option to add on 8' and 9' ICH's.
• - 2x4 corner braces none required on 8'or 9'interior dear heights). • Convert to M's. Knee Bracing (Refer to bracing note on previous page.) • Option to add 2x6 @
45 ° .
• None required.
Lower Chord Stabilizers N/A
_—r 2x4.
Wind Bracing (roof line) • Option to add on 24', 27', 30' and 36'
• 2x4 wind braces (None required on 24', 27', 30', and 36' spans,) (Refer to spans.
drawing on next a e. ) • Option to increase to heavier bracing.
Wick Panel (steel)
• Roof and sides 29 gauge steel grade E, G -90 galvanized, 1 -1/2 mil Ceram -
A -Star siliconized polyester paint system.
One -piece metal roofing panels, up to 36' max. length. (i.e., 66' span with
a 12" overhang.) • 29 gauge Acrylume
All one -piece metal roofing panels and sidewall panels are fastened with 1" • Wood sidings and shingled roof.
#9 Woodgrip screws.
All metal roofing panels which are two -piece and greater are fastened with
1 -1/2" Woodgrip screws.
Screw lengths are adjusted accordingly for panels placed over insulation.
Slide Doors 42WD wood frame (with or without 5'x5'
• Steel frame. tem eyed lass.
4" added to the nominal ICH to provide for optional concrete flooring. N/A
Spans . Any size above, below or in between.
• 2 27' 30' 36' 40' 42' 45' 48' 51' 54' 60' 63' 66' 69' 72' 81' 90'
Pi
• 3/12 .5/12 4/12 • Higher or lower, including attic trusses.
I -
• • Other 1' increments.
19'-4" 20' -4"
Length • Adjustable length by bay size to required
• Standard is a 72' base. length.
Page CE -3 February 2011