=rn-2010-00156_0001.jpgR4-,2010 - 001510
Brandy Petersen
From: Allen Schoemaker
Sent: Thursday, September 02, 2010 2:19 PM
To: 'Ted Scott'
Cc: Brandy Petersen; Howard Wolfe; Phil Green (Blair, NE)
Subject: RE: 2232 Clark Street, Lot 1 BC Southfork Addition
Ted,
I would design for a 3/1 slope from the edge of the drive to the top of the culvert for mowing and driveway edge
stabilization. In addition you need to have a minimum amount of cover over the culvert to help spread the load from
the driveway. This depth will vary depending on the materials you use such as concrete verses PVC verses metal. You
should check with the sales staff of the distributor for the culvert you purchase on the minimum depth of cover over the
culvert from the bottom of the driveway.
Hopefully this help. If you have any other questions, please contact me.
W K 1111elllCGAe-9
Director of Public Works
City of Blair
402 - 426 -419
ARS @ci.blair.ne.uS
From: Ted Scott [ mailto :ted @medallioncustomhomes.com]
Sent: Thursday, September 02, 2010 2:15 PM
To: Allen Schoemaker
Subject: RE: 2232 Clark Street, Lot 1 BC Southfork Addition
Allen - Thank you for providing the detailed information. In regard to the culvert, do you have a minimum width for the
culvert? I believe the driveway will be approximately 14' in width.
Thank you,
Ted Scott
Medallion Custom Homes, Inc.
2935 Pine Lake Road
Suite A
Lincoln, NE 68516
402 - 202 -2482
402 - 423 -2029 Fax
teclO�medallioncustomhomes.com