Loading...
2019-07-10 Fremont Electric Water Plant LightingContract THIS CONTRACT AND AGREEMENT made and entered into this l Oth day of July, 2019 by and between the City of Blair, Nebraska, hereinafter referred to as "Owner", and Fremont Electric, hereinafter referred to as the "Contractor" WITNESSETH: Contractor, for and in consideration of the sum of $34,885.00 payable as set forth in this contract, hereby agrees to perform, in accordance with the specifications, the various items of work awarded said contractor on the 9th day of July, 2019, as follows: Being the Lump Sum Bid in the attached proposal which is a part of this contract. That it is mutually understood and agreed by parties hereto that the Contractor's Bond, the proposal Project Specifications, Special Provisions and all supplemental agreements are a part of this contract. The Contractor expressly warrants that they have no third party to solicit or obtain this contract in their behalf or to cause or procure the same to be obtained upon compensation in any way contingent in whole or in part, upon such procurement, and that they has nor paid or promised or agreed to pay to any third person in consideration of such procurement or in compensation for service in connection herewith, any brokerage, commission, or percentage upon the amount to be received by them hereunder, and that they have not, in estimating the contract price determined by them, included any sum by reason of any such brokerage, commission or percentage; and that all monies payable to the Contractor hereunder are free from obligation of any other person for services rendered or supposed to have been rendered in the procurement of this contract. Contractor further agrees that any breach of this warrant shall constitute adequate cause or the annulment of this contract by the Owner, and that the said Owner may retain for its own use, from any sums due or to become due hereunder, an amount equal to any brokerage, commission or percentage so paid or agreed to be paid. All work required in carrying out this contract shall be performed under direct supervision of the Owner or its representative in compliance with the laws of the State of Nebraska. Contractor also states that they will comply with Fair Labor Standards in the performance of this contract. That the Contractor further agrees to supply and pay all just claims for materials, supplies, tools, fuels, lubricants, equipment, rental, machinery insurance premiums and services used or consumed in the construction of the work by them or any of their subcontractors in carrying out the provisions of this contract, and further agrees that the Contractor's Bond shall be held to cover all such claims. That in consideration of the foregoing, the Owner hereby agrees to pay the Contractor promptly the amounts set forth herein subject to the conditions set forth in this contract or any part thereof as herein described. It is further understood and agreed that the Contractor shall not do any work or furnish any materials not covered and authorized by this contract unless ordered in writing by the Owner. Any such work which may be done or any such materials which may be furnished by the Contractor with out such written order first being given shall be at their own risk, cost and expense; and the Contractor hereby convents and agrees that they shall make no claim for compensation for any work so done or any materials so furnished. IN WITNESS WEREOF, the parties hereto have set their hands for the purpose herein expressed to this instrument this 10th day of September 2019. CITY OF BLAIR CONTRACTOR Fremont Electric Richard Hansen, Mayor 77n Pi sident- -_, Attest: Brenda R. Wheeler Secretary City Cleric fremont electric, 'Inc. Phone (402) 727-491 Fax (402) 727-81 Industrial - Commercial ° Residential www.frernoiitelect`ricinc.com July 1, 2019 City of Blair Attn: Al Schoemaker RE: Water Treatment Plant -Lighting Price includes labor and material to install the following as per walk thru discussions 1245 Mills Road Fremont, Nebraska 68025 Replace 6 existing wall pack fixtures with 6 new 1,300 lumen 40K LED wall pack fixtures Install 1- new 1,300 lumen 40K LED wall pack between the generators on the outside east wall of the building. We will surface mount conduit and extend the circuit from an existing exterior wall pack. Replace and mount a new 1,300 lumen 40K LED fixture higher on the building above the South entrance. The conduit will be outside surface mounted. Replace the existing HID fixtures on the 2 existing poles west of the office with 2-8,000 lumen 30K fixtures. Each light will have a photocell. Install 4 new 20' poles with a 8,000 lumen 30K LED fixtures. There will be one fixture per pole. The poles will be mounted on a 24" concrete base approximately 36" above ground. The poles will be fed from the existing pole light circuit. Each light will have a photocell. Bid Price --- $34,885.00 --- Note: Backfill will be to rough grade, no sod or seeding included. All owner utilities will need to be located by the owner. Exact placement of pole lights to be determined by the owner Owner to verify the wall packs to be replaced Permit not included Owner to approve all fixture shop drawings before ordering If you have any questions, please call me. Thank you, Les Shallberg President Specifications D -Series Size 0 LED Area Luminaire t tRiBNtY Number I141I1.' !ah 1 �: tlFnlf.Ji{ r'"'t^:' : iy'• I:: 6't „l •-3.i-•.."•::'"1'f�l i Introduction The modern styling of the D -Series is striking yet unobtrusive - making a bold, progressive statement even as it blends seamlessly with its EPA: 0.8 ftzi (.01 m=) Type Ishort T5S TypeVshort L m"r'The environment. D -Series distills the benefits of the latest in LED Length: 26" W technology into a high performance, high efficacy, Type 11 short T5M TypeVmedium (66.0 cm) L long -life luminaire. The outstanding photometric Width: 13" (33.0 cm) 40C 40 LEDs (two engines) 1000 1000 m --- ...--- _ performance results in sites with excellent Height: 7" RPA uniformity, greater pole spacing and lower power (17.8cm) AMBPC Amber US density. It is ideal for replacing up to 400W metal Weight (max): 16.25kkg) halide with typical energy savings of 65% and 30C 30 LEDs (one engine) expected service life of over 100,000 hours. ®.I1� `' ® I •ser -' EXAMPLE: DSXO LED 40C 1000 40K T3M MVOLT SPA DDBXD DUOLIED DSXO LED Forward optics 530 530mA 30K 3000K T1S Type Ishort T5S TypeVshort MVOLT4 Shipped included IA DLL48OF1.SCULIU 20C 20 LEDs (one engine) 700 700 m 40K 4000K T2S Type 11 short T5M TypeVmedium 120' SPA Square pole mounting House -side shield for3D LED unit l6 40C 40 LEDs (two engines) 1000 1000 m 50K 5000K T2M Type 11 medium TSW Type Vwide 208' RPA Round pole mounting Rotated optics' (1 A) AMBPC Amber US Type ill short BLC Backlight control' 2404 WBA Wall bracket 30C 30 LEDs (one engine) converted' or T3M Type III medium LU Left corner cutoff' 277' SPUMBA Square pole universal mounting adaptor T4M Type IVmedium RCCO Right corner 3475 RPUMBA Round pole universal mounting adaptor TFTM forward throw cutoff 4805 Shipped separately' medium KMA8DDBXD U Mastarm mounting bracket adaptor T5VS TypeVveryshort (spedfyfnish) ! y Shipped installed PIRIFC3V Morton/ambient sensor, 8-15'mountingheight,ambient Shipped installed DDBXD Dark bronze PER NEMA twist -lock receptacle only (no controls) a sensorenabledatlfc" HS House -side shield 16 DBLXD Black PERS Five -wire receptacle only (no controls) 41 PiRH1FC3V I Motion/ambientsensor, i5-30'rnountingheight, ambientsenso enabled at SF Single fuse (120,271, DNAXD Natural aluminum PER7 Seven -wire receptacle only (no controls) $' BL30 di11` BI-feveiswitcheddimming,30°5'x1° Bi -level 347V) 1' DWHXD White DMG 0-10V dimming driver (no controls) to � BLSO Bi -level switched dimming, 509615" DF Double fuse (208, 240, 48OV) ° DDBTXD Textured dark bronze DCR Dimmable and controllable via ROAM®(no controls) " i PNMTDD3 Part night, dim till dawnsL90 Leh rotated optics' DBLBXD Textured black PIR Motion/ambientSensor, 8-15'mountingheight, ambient sensor enabled atSic " PNMTSD3 Part night, dim5his1s R90 Right rotated optics' DNATXD Textured natural PIRH Motion/ambientsensor,l5-30'mountingheight, ambient sensorenabledat5fc1zaluminum pNMT6D3 Part night, dim 6INS 'S DDL Diffused drop lens 76 PNMT7D3 Part night, dim 7 his Is DWHGXD Textured white Controls & Shields DLL727f 151U Photocell -SSL twist -lock (120-277Y) :: DLL347F 1.5 CULIU Photocell - SSL twist-lock(347V)16 IA DLL48OF1.SCULIU Photocell - SSL twist-lock(48OV)1p •y, SCU Shorting cap a DSXOHS20CU House -side shield for 20 LED unit -y, HDSXOH530CU House -side shield for3D LED unit l6 U -c DSXOHS40CU Housrsideshield for4OLED unit V'a DSXODDLU Diffused drop lens(polycarbonate)16 PU6IBADD8XDU* Square and round pole universal mount - Ing backetadaptor(specifyfinish) Kh1A8DD8XDU Mast arm mounting bracket adaptor (specify finish) I For more control options, visit D7L and RURhi online. NOTES 1 30 LEDs (30C option) and rotated options (L90 or R90) only available together. 2 Not available with AMBPC. 7 3 AMBPC only available vith 530mA 0 700 mA. 4 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). 5 ecify 120V, 208V, 240V or 277V options only when ordering with fusing I FDF options). 5 Not available with single board, 530snA product (20C 530 or 30C 530). Not available with BL30, BL50 or PNMT options. 6 Available as a separate combination accessory: PUMBA (finish) U; 1.5 G vibration load rating per ANCI C136.31. 7 Must be ordered as a separate accessory; see Accessories information. For use with 2-3/8" mast arm (not included). 8 Photocell ordered and shipped as a separate line item from Acuity Brands Controls. See accessories. 9 If ROAM® node required, it must be ordered and shipped as a separate line item from Acuity Brands Controls. Not available with DCR. 10 DMG option for 347V or 480V requires 1000mA. 11 Specifies a ROAM® enabled luminaire with 0-10V dimming capability; PER option required. Additional hardware and services required for ROAM® deployment; must be purchased separately. Call 1-8(10-442-6745 or email: -ales@roarnsnr;ices.net. N/A with PIR options PERS, PER7, BL30, BL50 or PNMT options. 12 PIR and PIRIFC3V specify the Sen<eri,.itdl SBGR 10 ODP control; PIRH and PIRHIFC3V speci(v the Senso,-Svihd, SBGR-6 ODP control; see Motion Sensor Gude c r details. Dimmin driver standard. Not available with PERS or PERT. Ambient sensor disabled when ordered with DCR. Separate on/off required. 13 Requires an additional switched circuit. 14 Dimming driver standard. MVOLT only. Not available with 347V, 48OV, DCR, PERS, PER7 or PNMT options. 15 Dimming driver standard. MVOLT only. Not available with 347V, 48OV, DCR, PERS, PER7, BL30 or BL50. 16 Also available as a separate accessory; see Accessories information. 17 Single fuse (SF) requires 120V, 277V or 347V. Double fuse (DF) requires 208V, 240V or 480V. 18 Requires luminaire to be specified with PER option. Ordered and shipped as a separate line item from Acuity Brands Controls. One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 © 2011-2016 Acuity Brands Lighting, Inc. All rights reserved. DSXO-LED Rev. 01/14/16 Page 1 of 5 Template #8 Top of Pole 2.650` OS1(0 scares a min ue ddiblp patlem Wn Dre AERIS°' family. Specify Das drilin0 pa(fam when spec6ling pales; per,lle tape heiwr, DM19AS Sin91emiR DM29A5 '2 AW 0.563" DM28Af.. 2g111r. DA139AS 3et80° DA149A5 4 at 006 DM32AS 3 e(120° ).400' 4vm;l4: SSA 20 40 DM19AS11081(0 2 PLCS) wsitOthmialighfingY%C �S'°'� qs roses ourxidet8eetionolpole; x<essodesand eduratamltoda 'P4wdp* top must be 3.2SOD. mnmwn. "For round o, rmuntag (FTA) o*. Tenon Mounting Slipfitter** 2-3/8" AST20-190 AST20-280 AST20-290 AST20-320 AST20-390 AST20-490 2-7/8" AST25-190 AST25-280 AST25-290 AST25-320 AST25-390 AST25-490 4" AST35-190 AST35-280 AST35-290 AST35-320 AST35-390 AST35-490 To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting's D-S,26us A,,ia li,nop3go. Isofootcandle plots for the DSXO LED 40C 100040K. Distances are in units of mounting height (20'). LEGEND 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 0.1 fc 44 ° a ° -2 ° ■ 3 3 s 3 .8 3 s 0.5 fc 2 - 2 � 2 � 2 1.0 fc 1 v 1 1 H 1 a NQ a as d a am -1 c� n •1 - � � •1 � P 1 � P .2 .2 '2 .2 A 6 .3 Z .3 2 .3 6 Z w Zw ,3 Zw Z 2 4 ms 4 < ..r < T75 F. '� T3M x3 T4M HS H 3 TSM pe'; Lumen Ambient Temperature (LAT) Multipliers Use these factors to determine relative lumen output for average ambient temperatures from OAO'C (32-104`x. 0°C 32°F 1.02 10°C 50°F 1.01 20°C 68°F 1.00 25`C 77°F 1.00 30°C 86°F 1.00 40°C 104°F 0.99 Projected LED Lumen Maintenance Data references the extrapolated performance projections for the platforms noted in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM -80-08 and projected per IESNATM-21-11). To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. 25,000- :, 50,000 100,000.: _ ' DSXO LE1120_C100D _ 1 1 0.98 - 0.96 0.93 !_ _ _ DSXO LED 40[1000 - 1. 0.98 -095 0.90. - };_= 1 _ . 0.99 ---- 0.99 - 0.99 - Electrical .. 1tFusfn �itms 1208 240 P7 AW /j��j� One Lithonia Way Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • a'rr,..'t :nn'a co DSXO-LED Rev. 01/14/16 f,71bfrflI� ©2011-2016 Acuity Brands Lighting, Inc. All rights reserved. Page 2 of 5 530 35 0.34 0.22 0.21 0.20 -- -- 20C 700 45 0.47 0.28 0.24 0.22 0.18 0.14 1000 72 0.76 0.45 0.39 0.36 0.36 0.26 530 52 051 0.31 0.28 0.25 -- -- 30C 700 70 0.72 0.43 0.37 0.34 0.25 0.19 1000 104 1.11 0.64 0.56 0.49 0.47 0.34 530 68 0.71 0.41 0.36 0.33 0.25 0.19 40C 700 91 0.94 0.55 0.48 0.42 0.33 0.24 1000 138 1.45 0.84 0.73 0.64 0.69 0.50 /j��j� One Lithonia Way Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • a'rr,..'t :nn'a co DSXO-LED Rev. 01/14/16 f,71bfrflI� ©2011-2016 Acuity Brands Lighting, Inc. All rights reserved. Page 2 of 5 W2 _ Lumen Output Lumen values are from photometric tests performed in accordance with IESNA LM -79-08. Data is considered to be representative of the configurations shdwn, within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here. LITHL7MIA One Lithonia Way Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 .', r;.' o 'a.cc- DSXO-LED Rev. 01/14/16 L,la"rll{� ©2011-2016 Acuity Brands Lighting, Inc. All rights reserved. Page 3 of 5 bb ..77 T1S 4,079 1 0 1 117 4,380 p 1 0 1 125 4,408 1 0 1 126 �112,541 sx ISE 1 0 7 73 T2S 4,206 1 0 1 120 4,516 1 0 1 129 4,544 1 0 1 130 2,589 1 0 1 74 T2M 4,109 1 0 1 117 4,413 1 0 1 126 4,440 1 0 1 127 2,539 1 0 1 73 BS 4,104 1 0 1 117 4,407 1 0 1 126 4,435 1 0 1 127 2,558 1 0 1 73. T3M 4,142 1 0 1 118 4,447 1 0 1 127 4,475 1 0 1 128 2,583 1 0 1 74 T4M 4,198 1 0 1 120 4,508 1 0 1 129 4,536 1 0 1 130 2,570 1 0 1 73 TFTM 4,135 1 0 1 118 4;440 1 0 2 127 4,468 1 0 2 128 2,540 1 0 1 73 530 35W T5VS 4,368 2 0 0 125 4,691 2 0 0 134 4,720 2 0 0 135 2,650 1 0 0 76 T5S 4,401 2 0 2 126 4,725 2 0 0 135 4,755 2 0 0 136 2,690 1 0 0 77 TSM 4,408. 2 0 1 126 4,734 3 0, 1 135 4,763 3 0 1 136 2,658 2 0 0 76 TSW 4,344 3 0 1 124 4,664 3 0 1 133 4,693 3 0 1 134 1 2,663 2 0 1 76 BLC 3,071 1 0 1 88 3,297 1 0 1 94 3,318 1 0 1 95 LCCO 2,983 1 0 1 85 3,204 1, 0 1 92 3,224 1 0 1 92 RCCO 2,983 1 0 1 85 3,264 1 0 1 92 3,224 1 0 1 92 TIS 5,181 1 0 1 115 5,563 1 0 1 124 5,598 1 0 1 124 3,144 1 0 1 70 T2S 5,342 1 0 1 119 5,736 1 0 1 127 5,772 1 0 1 128 3,203 1 0 1 71 T2M 5,219 1 0 1 116 5,605 1 0 1 125 5,640 1 0 1 125 3,141 1 0 1 70 T3S 5,213 1 0 1 116 5,598 1 0 1 124 5,633 1 0 1 125 3,165 1 0 1 70 T3M 5,260 1 0 1 117 5,649 1 0 2 126 5,684 1 0 2 126 3,196 1 0 1 71 T4M 5,332 1 0 1 118 5,725 1 0 2 127 5,761 1 0 2 128 3,179 1 0 1 71 20C TFTM 5,252 1 0 2 117 5,640 1 0 2 12S 5,675 1 0 2 126 _ 3,143 1 0 1 70 (20 LEDs) 700mA 45W T5VS 5,548 2 0 0 123 5,958 2 0 0 132 5,995 2 0 0 133 3,278 2 0 0 73 T55 5,589 2 0 0 124 6,002 2 0 0 133 1 6,039 2 0 0 134 3,328 2 0 0 74 _ _ _ T5M 5,599 3 0 1 124 6,012 3 0 1 134 6,050 3 0 1 134 2 0 1 73 T5W 5,517 3 0 1 123 5,924 3 0 1 132 5,961 3 0 1 1 132 _3,288 3,295 2 0 1 73 8LC 3,909 1 0 1 87 4,198 1 0 1 93 4,224 1 0 1 94 _ LCCO 3,798 1 0 1 84 4,078 1 0 1 91 4,104 1 0 1 91 RCCO 3,798 1 0 1 84 4,078 1 0 1 91 4,104 1 0 1 91 T1S 7,085 1 0 1 98 7,608 2 0 2 106 7,656 2 0 2 106 T25 7,305 1 0 1 101 M45 1 2 0 2 169 7,894 2 0 2 110 T2M 7,138 1 0 2 99 7,665 2 0 2 1 105 1 7,713 2 0 2 107 T35 7,129 1 0 1 99 7,656 2 0 2 106 7,704 2 0 2 107 T3M 7,194 1 0 2 100 7,725 2 0 2 101 7;773 2 0 2 108 T4M 7,292 1 0 2 101 7,830 2 0 2 109 7,879 2 0 2 109 TFTM 7,183 1 0 2 100 7,713 1 0 2 107 7,761 1 0 2 108 1000 mA 72W T5VS 7,588 2 0 0 105 8,148 3 D 0 113 8,199 3 0 0 114 T55 7,644 2 0 0 106 8,208 2 0 0 114 8,259 2 0 0 115 T5M 7,657 3 0 1 106 8,222 3 0 1 114 8,274 3 0 1 115 T5W 7,545 3 0 1 105 8,102 3 0 2 113 8,153 3 0 2 113 BLC 5,162 1 0 1 72 5543 1 0 2 1 77 1 5,578 1 1 0 1 1 77 LCCO 5,015 1 0 2 70 1 5,386 1 0 2 75 5,419 1 0 2 75 RCCO 5,015 1 0 2 70 5,386 1 0 2 75 5,419 1 0 2 75 LITHL7MIA One Lithonia Way Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 .', r;.' o 'a.cc- DSXO-LED Rev. 01/14/16 L,la"rll{� ©2011-2016 Acuity Brands Lighting, Inc. All rights reserved. Page 3 of 5 -- - --- I M11-3 _ " Lumen Output Lumen values are from photometric tests performed in accordance with IESNA LM -79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here. 530mA I 68W 40( (40 LEDs) 700 mA 91 W INM IU;1U5 L U L 111 1U,958 L U 3 110 11,01/ Z U 3 111 6,LU3 1 U 1 6U. TSVS 10,781 3 0 0 118 11,576 3 0 1 127 11,649 3 0 1 128 6,569 2 0 0 72 T5S 16,860 3 0 1 119 11,662 3 0 1 128 11,134 3 0 1 129 6,569 2 0 0 72 T5M 10,879 3 0 2 120 11,682 3 0 2 128 11,755 3 0 2 129 6,491 3 0 1 71 T5W 10,119 3 0 2 118 11,511 4 0 2 126 11,583 4 0 2 127 6,504 3 0 2 71 BLC 7,819 1 0 2 86 8,396 1 0 2 92 8,448 1 0 2 93 LOCO 7,596 1 0 2 83 8;157 1 0 2 90 8,208 1 0 2 90 RCCCO 1 7,596 1 0 2 83 8,157 1 1 0 2 90 8,208 1 0 2 90 1000mA 1384 TIS 13,767 2 0 2 100 14,783 3 0 3 107 14,876 3 0 3 108 _ _ T25 14,194 2 0 2 103 15,242 3 0 3 110 15,338 3 0 3 111 T2M 13,869 2 0 2 101 14,893 3 0 3 108 14,986 3 0 3 109 _ T3S 13,852 2 0 2 100 14,875 2 0 2 108 14,968 2 0 2 108 T3M_ 13,978 2 0 2 101 15,010 3 0 3 109 15,104 3 0 3 109 _ TV 14,168 2 0 2 103 15,214 3 0 3 110 15,309 3 0 3 111 u _ TFTM 13,956 2 0 3 101 14,987 2 0 3 109 15,080 2 0 3 109 _ _ _ TSVS 14,744 3 0 1 107.__ 15,832 3 0 1 115 15,931 4 0 1 115 _ T5S 14,852 3 0 1 108 15,948 3 0 1 116 16,048 3 0 1 116 T5M 14,878 4 0 2 108 15,976 4 0 2 116 16,076 4 0 2 116 _ T5W 14,660 4 0 2 106 15,742 4 0 2 114 15,840 4 0 2 115 BLC 10,325 1 0 2 75 11,087 1 0 2 80 11,156 1 0 2 81 LCCO 10,031 2 0 2 73 10,771 2 0 3 78 10,839 2 0 3 79 _ RCCO 10,031 2 0 2 73 10,771 2 0 3 78 10,839 2 0 3 79 I-%MMVIA Lljg"rflva� One Lithonia Way • Conyers, Georgia 30012 • © 2011-2016 Acuity Brands Lighting, Inc. All rights reserved. Phone: 800.279.8041 • Fax: 770.918.1209 • n^i; ;: ;^ +'a.ca- DSXO-LED Rev. 01/14/16 Page 4 of 5 FEATURES & SPECIFICATIONS INTENDED USE The sleek design of the D -Series Size 0 reflects the embedded high performance LED technology. It is ideal for many commercial and municipal applications, such as parking lots, plazas, campuses, and streetscapes. CONSTRUCTION Single -piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance and future light engine upgrades. The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65). Low EPA (0.8 ftp for optimized pole wind loading. FINISH Exterior parts are protected by a zinc -infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi -stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in both textured and non -textured finishes. OPTICS Precision -molded proprietary acrylic lenses are engineered for superior area lighting distribution, uniformity, and pole spacing. Light engines are available in standard 4000 K (70 minimum CRI) or optional 3000 K (70 minimum CRI) or 5000 K (70 CRI) configurations. The D -Series Size 0 has zero uptight and qualifies as a Nighttime Friendly- product, meaning it is consistent with the LEED- and Green Globes"" criteria for eliminating wasteful uptight. ELECTRICAL Light engine(s) configurations consist of high -efficacy LEDs mounted to metal -core circuit boards to maximize heat dissipation and promote long life (up to L96/100,000 hours at 25°C). Class 1 electronic drivers are designed to have a power factor >90%, THD <20%, and an expected life of 100,000 hours with <1% failure rate. Easily serviceable 10kV or 6kV surge protection device meets a minimum Category C Love operation (perANSI/IEEE C62.41.2). INSTALLATION Included mounting block and integral arm facilitate quick and easy installation. Stainless steel bolts fasten the mounting block securely to poles and walls, enabling the D -Series Size 0 to withstand up to a 3.0 G vibration load rating per ANSI C136.31. The D -Series Size 0 utilizes the AERIS-series pole drilling pattern. Optional terminal block, tool -less entry, and NEMA photocontrol receptacle are also available. LISTINGS UL Listed for wet locations. Light engines are IP66 rated; luminaire is IP65 rated. Rated for -40°C minimum ambient. U.S. Patent No. D672,492 S. International patent pending. DesignUghts Consortium@O (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at svan, desgn'ghts.ore to confirm which versions are qualified. WARRANTY 5 -year limited warranty. Complete warranty terms located at arvrn, aa, tybranos.com/Cus:cmer�?esou¢es/Te,ms_aro_rena:;cns.asox Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. Z-17 �fMVIA One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • n;r,•:.'a c^ a.wn DSXO-LED Rev. 01/14/16 LIAGWI–MA7. 0 2011-2016 Acuity Brands Lighting, Inc. All rights reserved. Page 5 of 5 v almontf STRUCTURES SOFT SQUARE STEEL DS330 Fatique Resistant Job Name: Client Name: Job Location - City: State: Created By: Date: Product: Quote: Customer Approval: Date: T-6' Tenon Top* Pole - The pole shaft is fabricated from hot rolled commercial quality carbon steel of one-piece construction with a minimum yield strength of 55,000 psi. Pole Top -A removable pole cap is provided for poles receiving drilling patterns for side -mount luminaire arm assemblies. For top mount luminaire and/or bracket consult the factory. Handhole -A covered handhole and grounding provision with hardware is provided. Pole Cap -Plastic Full Base Cover - The two-piece standard full base cover is fabricated from ABS plastic. Optional Dart Square -2T cast and decorative base covers available as special order. Anchor Base - The anchor base (base plate) conforms to ASTM A36. Anchor Bolts -Anchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and two flat washers. Bolts have an "L" bend on Cross Section one end and are galvanized a minimum of 12" on the threaded end. Hardware - All structural fasteners are galvanized high strength carbon steel. All non-structural fasteners are galvanized or zinc -plated carbon steel or stainless steel. Handhole Finish - Standard finishes are galvanized, prime painted or any of Valmont's V-PROTM Protection Systems. Additional finish options available upon request. m Design Criteria - Please reference Design Criteria Specification for appropriate design conditions. ro c E O Z 11 Consult factory on loading criteria for pole top mounted luminaires and/or brackets. VALMONT INDUSTRIES, INC. 28800 IDA STREET, PO BOX 358 - VALLEY, NE 68064 USA 800.825.6668 VALMONTSTRUCTURES.COM SOFT SQUARE STEEL DS330 Fatique Resistant Job Name: Client Name: Job Location - City: State: Created By: Date: Product: Quote: Customer Approval: Date: 90` STRUCTURES Anchor Base Detail 180° I Bolt Slots/Holes As viewed from of pole. top 0° - Handhole 12'-0" 24.4 610 18.8 470 14.8 1 370 4.00 4.00 11 90 S400Q120 , 14'-0" 19;9 .' 498 ' 15.1 ' ; 378.:= 11.7 293 ' 4:00 4.00 11 •. 100 :> S400Q140 ,:: 16'-0" 15.9 398 11.8 295 8.9 223 4.00 4.00 11 115 S4000160 18'-0" 12.6 315 -9.2 ' 230 ' 6.7 :168' ` 4:00 4,00. 11 125 84000180 9.6 240 6.7 167 4.5 150 4.00 4.00 11 140 S40OQ200 20'-0" 17.7 443 12.7 343 9.4 235 5.00 5.00 11 185 S50OQ200 28.1 703 21.4 535 16.2 405 5.00 5.00 1 7 265 S50OW200 4.8 150 2.6 , 100 ,' : 1.0 . `i : 50 4.00 =' 4.00 ' ' ;11 170 • S4000250 ' 10.8 ` .270 7.7 ;° 188. 5.4 135 4.00. .4 00 7 "'. 245. S400W250;" 25.-0" 9.8 245 .' ' 6.3 157 . '; 3.7 150 5.00 5.00. '. i 11, 225. $500Q250 18:5. 463 ': 13.&: < 333': 9.5: 238 5.00 '.5.00: .7- 360:.:.:, S50OW250 . 6.7 168 4.4 110 2.6 65 4.00 4.00 7 291 S40OW300 4.7 150 2.0 50 N/A N/A 5.00 5.00 11 265 S50OQ300 30'-0" 10.7 267 6.7 167 3.9 100 5.00 5.00 7 380 S50OW300 19.0 475 13.2 330 9.0 225 6.00 6.00 7 520 S600W300 5.9 150 _ 2.5 . 100 ` N/A N/A 5.00 5.00 - 7 440. _, S500W350 _ 35' 0" 12.4'' 310 7,6 190 4.2 105 6.00. 6.00 7 540 "` -6-0-5--F S6001N350 40-0" 7.2 180 3.0 1 75 1 N/A N/A 1 6.00 6.00 7 S60OW400 Bolt Circle ?70° 1. Maximum EPA (Effective Projected Area) and weight values are based on side mounted fixtures only. Consult factory on loading criteria for pole lop mounted luminaires and/or brackets. Variations from sizes above are available upon inquiry at the factory. Satisfactory performance of poles is dependent upon the pole being properly attached to a supporting foundation of adequate design. 2. Structure weight is a nominal value which includes the pole shaft and base plate only. 3. Belled -bottom will have reduced thickness due to the cold -working process. However, the belled -bottom meets or exceeds the structural capacity of the original square section. In addition, the rounded section provides better fatigue resistance. PRODUCT ORDERING. CODES =Galvanize - =Prime Paint V1 =V -PRO 1 Basic 1 Coat Powder. V2 = V -PRO 2 2 Coat Powder or Liqu epoxy primer coat. V3=V-PRO 3 2 Coat Powder or Uqu ncludes zinc primer 8 p S40OQ100 Drill Mounting GV= Galvanize = Galvanize S40OQ120 Di = 1 Luminaire PP = Prime Paint = Prime Paint S400Q140 D2 = 2 @ 180° FP = Finish Paint White S400Q160 D4 = 4 @ 90° GF = Galvanized + ST = Sandstone S400Q180 D5 = 2 @ 90° Finish Paint BK = Black S40OQ200 SM = Silver Metallic S50OQ200 D6 = 3 @ 90° SL = Silver Includes S500W200 Tenon Mounting LG = Light Gray I S40OQ250 P2 = 2.38" OD x 4.00° SG = Slate Gray S400W250 P4 = 4.00" OD x 6.00" DT = Dark Tan S500Q250 MB = Medium Bronze i S500W250 CB = Bronze I S40OW300 DB = Dark Bronze S50OQ300 BN = Brown S500W300 HG = Hunter Green I S60OW300 DG = Dark Green S50OW350 RD = Red S60OW350 SC = Special Color S60OW400 (Contact Factory) coat. V4 = V -PRO 4 2 Coat Powder or Uqui ncludes zinc primer & remium top coat. Accessories at VALMONT INDUSTRIES, INC. 28800 IDA STREET, PO BOX 358 - VALLEY, NE 68064 USA 600.825.6668 VALMONTSTRUCTURES. COM aa)) N c vi c 3 C N 0.9 Ern a) a) a) av'i w 'EE a') E 8 22- 2 2 C 0 �c m 0 r C. r U n. N Catalog D -Series Size 1 Number LED Wall LuminaireII Notes - ghiln, Type t4Gnmh,E facts MWMY d"series Introduction Specifications The D -Series Wall luminaire is a stylish, fully Luminaire Back Box (BBW, ELCW) integrated LED solution for building -mount Width: 13-3/4" Weight: 12 lbs Width: 13-3/4" BBW 5 lbs applications. It features a sleek, modern design (34.9 cm) 15.4 kg) (34.9 cm) Weight: (2.3 kg) ELCW and is carefully engineered to provide long-lasting, Depth: 10" Depth: 4" 10 lbs (25.4 cm) (10.2 cm) Weight: (4.5 kg) energy-efficient lighting with a variety of optical Height: 6-3/8„ Height: 6-3/8" and control options for customized performance. (16.2 cm) (16.2 cm) With an expected service life of over 20 years of H H Evv nighttime use and up to 74% in energy savings B over comparable 250W metal halide luminaires, ® the D -Series Wall is a reliable, low -maintenance yy For 3/4" NPT side -entry lighting solution that produces sites that are conduit (BBW only) exceptionally illuminated. EXAMPLE: DSXW1 LED 20C 1000 40K T3M MVOLT DDBTXD ' DSXW1 LED DSXW1 LED 10C 10 LEDs (one engine) 20C 20 LEDs (two engines)' 350 350 mA 530 530 mA 700 700 mA 1000 1000 mA 0 A)' 30K 3000K US Type 11 Short MVOLTZ Shipped included Shipped installed 40K 4000 K T2M Type II Medium 1203 (blank) Surface PE Photoelectric cell, button type 6 50K 5000 K BS Type III Short 208 3 mounting DMG 0-10v dimming wires pulled outside fixture (for AMBPC Amber T3M Type111Medium 2403 bracket One Lithonia Way ° Conyers, Georgia 30012 • Phone: 800.279.8041 ° %%"vAithonia.com DSXWt-LED usewith an external control, ordered separately) DWHXD phosphor T4M Type IV Medium 2773 BBW Surface- PIR 180°motion/ambient light sensor, <15'mtglit '7 convertedmounted TFTM Forward Throw 347 •34 back box PIRH 180°motion/ambient light sensor, 15-30'mtght° Medium 4803•' (for conduit PIRIFC3V Motion/ambient sensor, 8-15' mounting height, ASYDF Asymmetric entry) 5 ambientsensorenabled atlfcv diffuse PIRHIFC3V Motion/ambient sensor, 15-30'mounting heigh4 ambientsensor enabled at tfc1� ELCW Emergency battery backup (includes external component enclosure), CATitie 20 Noncompliantes ^� ,Ti ';�' ''' ��' sa � �Y;�. `� �`-��"in r•z �' S �"�:� i'*#`` "4`�, iz''='yam x-' � Y Y v' 2'` '-i �' "�{�,� �- �`4 N '� pt•, tt•t •r.. DDBXD r.rk brt DSSXD Sandstone DWHGXD Textured white t r t 7 Reference Motion Sensor table on page 3. : r r t DBLXD Black DDBTXD Texturedt, bronze DSSTXD Textured sandstone DF Double (208,240 or a guard DNAXD Natural aluminum DBLBXD Textured black HS House -side shie1 One Lithonia Way ° Conyers, Georgia 30012 • Phone: 800.279.8041 ° %%"vAithonia.com DSXWt-LED Vandal guard DWHXD White DNATXD Textured natural aluminum .SPD • ara t• protection 11LDDL Diffused t st lens I Accessories NOTES 1 20C 1000 is not available with PIR, PIRH, PIRt F-C3V or PIRHIFC3V. 'Orderedandshippedseparatery 2 MVOLTdriveroperates onany line voltage from 120-277V(50/60Hz). MUMS U House -side shield (one per 3 Single fuse (SF) requires 120, 277 or 347 voltage option. Double fuse (DF) requires 208, 240 or 480 voltage option. lightengine) 4 Only available with 20C, 700mA or 1000mA. Not available with PIR or PIRH. 5 Back box ships installed on fixture. Cannot be field installed. Cannot be ordered as an accessory. DSXWBAVU 6 Photocontrol (PE) requires 120, 208, 240, 277 or 347 voltage option. Not available with motion/ambient light sensors (PIR or PIRH). Wire guard accessorydeterientspIkes DSXl41WG U tV(re guard accessory 7 Reference Motion Sensor table on page 3. DSX%YlVGU Vandal guard accessory 8 Cold weather (-20C) rated. Not compatible with conduit entry applications. Not available with BBW mounting option. Not available with fusing. Not available with 347 or 480 voltage options. Emergency components located in bads box housing. Emergency mode IES files located on product page at wvrtv.lithonia.com 9 Not available with SPD. 10 Not available with ELCW. 11 Also available as a separate accessory; see Accessories information. 12 Not available with ELCW. L1Tj= Z7,fffA One Lithonia Way ° Conyers, Georgia 30012 • Phone: 800.279.8041 ° %%"vAithonia.com DSXWt-LED L%7/41%®mA, 0 2013-2019 Acuity Brands Lighting, Inc. All rights reserved. Rev. 3/06/19 o � Lumen Output Lumen values are from photometric tests performed in accordance with IESNA LM -79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here. ` ' ::.. D C 30Il0 K�'._LR s r_ 50 7i LB i=LL t1 9� DOOMS of 4 e i f 11 a _<� - .tri 7 O OD (tllLi YP • T2S 1,415 0 0 In 1 104 1,520 0 0 1 111 1,530 PO PORI 118"8940 0 1 69 T2M 1,349 0 0 1 104 1,448 0 0 1 111 1,458 0 0 1 112 852 0 0 1 66 T3S 1399 0 0 1 108 1,503 0 0 1 116 1,512 0 0 1 116 884 0 0 1 68 MOM 13W T3M 1385 0 0 1 107 1,488 0 0 1 114 1,497 0 0 1 115 876 0 0 1 67 T4M 1,357 0 0 1 104 1,458 0 0 1 112 1,467 0 0 1 113 858 0 0 1 66 TFTM 1,411 0 0 1 109 1,515 0 0 1 117 1,525 0 0 1 117 892 0 0 1 69 ASYDF 1,262 1 0 1 97 1,354 1 0 1 104 1,363 1 0 1 105 797 0 0 1 1 61 1`4 2,053 1 .0 . 1- 108. 2,205 ' ] 0 1 . 116 .2,220 ' 1 0 1 .117' 1,264 0 0 1 '67 12M" 1957 1' 0- t 103 -2102 1 0 1 111 2115 1 0 1 111 ' 1 205 0 ' 0 1 63 T3S . 2,031 1 . 0, -l. 107.. 2,181 1 0:." 1 .115: 2,194 .1 0. 1 115 1,250 0 0 ' -1 '66 530 mA 19W T3M'M49 1' .0.. 1 A00 2,159 ".1. 0' 1- 114. 2172. '1 0: .1 .1.14 :1237 .0 0. 1 'W. i4M 7' 0 1 104' 2415 1 0 . 1 :711 ' ' 2929 t 0 1 112 1,212 0 '. 0 1 ' 64 lOC TFTM 0 .0 1 108 2198 1. 0 1 116 2,372 1 0 1 116 1'260 0 0' 1 66 ASYDF1 0 1 96 1966 1. 0 ' 1 .103 1978. 1 0 1 104 1127. 0 .0 1 59 US 1 0 1 101 2 816 1 0 1 108 2,834 1 0 1 109 1,544 0 0 1 59 (10 LEDs) T2M 1 0 1 96 2,684 1 0 1 103 2,701 1 0 1 104 1472 0 0 1 57 T35 1 0 1 100 2,785 1 0 1 1 107 2,802 1 0 1 108 1,527 0 0 1 1 59 700 mA 26W T3M . 2,567 1 0 1 99 1 2,757 1 0 1 106 2,774 1 0 1 107 1,512 0 0 1 58 i4M 2,515 1 0 1 1 1 97 2,701 1 0 1 2,718 1 0 1 105 1481 0 0 1 57 TFTM 2,614 1 0 1 101 2,808 1 0 1 1 0 1 109 1,539 0 0 1 59 ASYDF 2,337 1 0 1 90 2,510 1 0 1 1 0 1 97 1,376 1 0 1 53 US 3;685. 1 0' 1. 94 .3957. 1 0 1 1 0 1 102 2,235 1 0' 1 57 T2M 3'512 1 0 1' 90. 3711 T - 0 1 1 0' 1 97 2130, 1 0 1 S5 T3S 3'644 1 0 1 93. 3.913 1 - . 0 -1 1 0. 1 101' , 2210 1 0 1 57 ' .1000mA 39W T3M.. 3607 1 '..0` .1': 92 3873 1 0.' 7,: 1 0 1 100 21$1 1. 0 1. 56' T4M 3534 1 - 0' 2 91 3'796 1 0 2 1 0 2 98 2143'' ' 1 .0 1 55 ' 1FTM 3'673 1 0!" 1 94. " 3945. 1 0". '1' .1 .0 1 . 102. 2228' 1 0 1' 57 ASYDF 3,284 1 0' 2 ' 84 3527 1 0 2 1 0 2 97 ' 1992 1 0. 1 -Si T25 2,820 1 0 1 123 3,028 1 0 1 1 0 1 132 1,777 1 0 1 77 T2M 2,688 1 0 1 117 2,886 1 0 1 1 0 1 126 1,693 1 0 1 74 T3S 2,789 1 0 1 121 2,994 1 0 1 13013,014 1 0 1 131 1757 0 0 1 76 350mA 23W T3M 2,760 1 0 1 120 2 965 1 0 1 1 0 1 130 1 739 1 0 1 76 i4M 2 704 1 0 1 118 2 905 1 0 1 126 2,922 1 0 1 127 1,704 1 0 1 74 TFTM 2,811 1 0 1 122 3,019 1 1 0 1 131 3,038 1 0 1 132 1,771 0 0 1 77 ASYDF 2,514 1 0 1 109 2,699 1 0 1 117 2,716 1 0 1 1 118 1,584 1 0 1 69 T2S. 4,079 . ' 1 0 1 '1 117. A380- 1 ` A 1 125 .4 ,407 1 0 1', 126 :2,504. 1 0 1 72 RM . 3,887 1 1 0 1 1 111' 4,174 1 6 1" .119 " 001 1 0 1 720 2387 ' 1 0` 1 68 T35 4,033 1 0. 1 115' 4,331 1 0 ..1 " 124 4,359. 1 0- 1. 125.' 2 477 1 0. 1 71 530W 35W "T3M '3993 1 0 • 2 114' 4,288 1 ' - 0 2 123- 4315 1 0 2 123• 2451 1' . 0 1 '70: . TO 3"912 1 . 0' 2 112. 4,2o7 1 0' • 2,.. 920, 4227 1 0' 2 ' 121 2'402 1' 0 1 69" ' 20C 1FTM 4,066 1 . 0 2 116 9;366 1 0 "2 125 ": '4394 1 0' 2` 126 2496 1 0 1 71 ASYDF 3,636 1 ' 0 . 2' 104 3,904 ' 1 0 2 112 ' 3-928 1 0� 2 = 112" 2 232 .1 .0 1' . '64 US 5,188 1 0 1 113 5,572 1 0 1 121 5,607 1 0 1 122 3 065 1 0 1 67 (20 LEDs) T2M 4,945 1 0 2 108 5,309 1 0 2 115 5,343 1 0 2 116 2,921 1 0 1 64 T35 5,131 1 0 2 112 5,510 1 0 2 120 5,544 1 0 2 121 3,031 1 0 1 66 700 mA 467N T3M S,078 1 0 2 110 5,454 1 0 2 119 5,487 1 0 2 119 3,000 1 0 1 65 T4M 4,975 1 0 2 106 5 343 1 0 2 116 5,376 7 0 2 117 2,939 1 0 1 64 TFTM 5,172 1 0 2 112 5 554 1 0 2 121 5 589 1 0 2 122 3,055 1 0 1 66 ASYDF 4,624 1 0 2 101 4965 1 0 2 108 4,996 1 0 2 109 2,732 1 0 1 59 T25 7,264 • 1 ' 0 2 99 ` TZ36 2. 0 2 1.06 T784 2 0 : 2 107' ' 4,05 1 0 1 61 T2M 6,865 1 " 0 2 94 7373 2 '0- .-2 7,419 2 "0 2' 102 41221 1 0. 1 58 T35 7,125 1 0.' .2 98. 7651 -1 .0 2 .7698 1 0 2 105' 4380 1 0 1 60 1000 mA 73W 13M 7,052 1 0 i 97 7;573 2 0. 2 1,626 2 0 2 704 4'335' 1 0 2 59 T4M 6 909 1 0 2 95 7420 1 0 2 d94 7466 1 0 2 102 4 248 .' 1 0 -2 58 TFTM 7182 1 . 0 2 98 7,712 . 1 . ' 0 . 2 . 7761 1 0" 2 tO 4415" 1' 0 2 60' ASYDF 6,421 2 0 2 88 6'896 _ 2' 0 3 6 938' 2 0 3 95 3,941 fAL,%MVMA One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • nw+cliti .r,nia.com DSXW1-LED LIAW- MA 0 2013-2019 Acuity Brands Lighting, Inc. All rights reserved. Rev. 3/06/19 Projected LED Lumen Maintenance Data references the extrapolated performance projections for the DSXW1 LED 20C 1000 platform in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM - 80 -08 and projected per IESNA TM -21-11). To calculate LLF; use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. t ! 0 25,000 50 000, 109,000, 1.0 0.95 _;0.93%I0 88 1000 74W 0.69 0.40 0.35 0.30 0.23 'for use with Inline Dusk to Dawn or timer a o B a To see complete photometric reports or download .(es files for this product, visit Lithonia Lighting's D -Series Wall Size 1 homepage. Isofootcandle plots for the DSXWt LED 20C 1000 40K. Distances are in units of mounting height (15'). LEGEND 4I 3 2, 1 0 1 2 3 4.- 7_.. _ 1. 0.1 fc 3. ■ 0.5 fc 2 y 1_ 1 1.0 fc t t I a�1 T2 .4 I _. _.T210 I� E' T3M Distribution overlay comparison to 25OW metal halide. ♦ 3 z t o 1 2 3 ! LEGEND 8 ■ DSXW1, 3 0 0.5 fc \ o TWF2, 2 (- A t I f. I a j = ■ 0.5 fc o- r _-}- I- 10'W Sidewalk LLDA: 1WF2=0.72 DSxw1=0.95 .a ZZ - .. T3S ZZ �w iWF22SOM Pulse, 15' Mounting Ht r T3M (left), ASYDF (right) lenses HS - House -side shields BSW- Bird -deterrent spikes WG-Wireguard VG - Vandal DDL- Diffuseddroplens guard FEATURES & SPECIFICATIONS INTENDED USE The energy savings, long life and easy -to -install design of the D -Series Wall Size 1 make it the smart choice for building -mounted doorway and pathway illumination for nearly any facility. CONSTRUCTION Two-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance. The LED driver is mounted to the door to thermally isolate it from the light engines for low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65). FINISH Exterior parts are protected by a zinc -infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi -stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in textured and non -textured finishes. OPTICS Precision -molded proprietary acrylic lenses provide multiple photometric distributions tailored specifically to building mounted applications. Light engines are available in 3000 K (70 min. CRI), 4000 K (70 min. CRI) or 5000 K (70 min. CRI) configurations. ELECTRICAL Light engine(s) consist of 10 high -efficacy LEDs mounted to a metal -core circuit board to maximize heat dissipation and promote long life (L88/100,000 hrs at 25°C). Class 1 electronic drivers have a power factor >90%, THD <20%, and a minimum 2.5KV surge rating. When ordering the SPD option, a separate surge protection device is installed within the luminaire which meets a minimum Category C Low (per ANSI/IEEE C62.41.2). INSTALLATION Included universal mounting bracket attaches securely to any 4" round or square outlet box for quick and easy installation. Luminaire has a slotted gasket wireway and attaches to the mounting bracket via corrosion -resistant screws. LISTINGS CSA certified to U.S. and Canadian standards. Rated for -40°C minimum ambient. DesignLights Consortium"' (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at wv,w.designlights.org/QPL to confirm which versions are qualified. WARRANTY Five-year limited warranty. Complete warranty terms located at: \-ANry^t.3cuity-brands.com/resources/terms-and-candifions Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. 0FA,UrfVVJV1 One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • www.lithonia-com DSXW1-LED LA7AZ7Z1VA9. 0 2013-2019 Acuity Brands Lighting, Inc. All rights reserved. Rev. 3/06/19 a W Lumen Ambient Temperature (LAT) Multipliers Electrical Load Use these factors to determine relative lumen output for average ambient temperatures C' from 0-40°C (32104T). f °e 'ld'.. ert• e e t 120V 208v 240' 277V 347V '.,48aV 0°C 32°F 1.02 10°C 50°F 1.01 350 14W 0.13 0.07 0.06 - ' 0.06 - - 20°C 68°F 1.00 1oc 530 20 W 0.19 0.11 0.09 0.08 - - 25°f 77°F 1.00 700 27W 0.25 0.14 0.13 0.11 30°C 86°F 1.00 1000 40W 0.37 0.21 0.19 0.16 - - 350 24W 0.23 0.13 0.12 0.10 - - 40°C 104°F 0.98 20C 530 36W 0.33 0.19 0.17 0.14 - - 700 47W 0.44 025 0.22 0.19 0.15 0.11 Projected LED Lumen Maintenance Data references the extrapolated performance projections for the DSXW1 LED 20C 1000 platform in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM - 80 -08 and projected per IESNA TM -21-11). To calculate LLF; use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. t ! 0 25,000 50 000, 109,000, 1.0 0.95 _;0.93%I0 88 1000 74W 0.69 0.40 0.35 0.30 0.23 'for use with Inline Dusk to Dawn or timer a o B a To see complete photometric reports or download .(es files for this product, visit Lithonia Lighting's D -Series Wall Size 1 homepage. Isofootcandle plots for the DSXWt LED 20C 1000 40K. Distances are in units of mounting height (15'). LEGEND 4I 3 2, 1 0 1 2 3 4.- 7_.. _ 1. 0.1 fc 3. ■ 0.5 fc 2 y 1_ 1 1.0 fc t t I a�1 T2 .4 I _. _.T210 I� E' T3M Distribution overlay comparison to 25OW metal halide. ♦ 3 z t o 1 2 3 ! LEGEND 8 ■ DSXW1, 3 0 0.5 fc \ o TWF2, 2 (- A t I f. I a j = ■ 0.5 fc o- r _-}- I- 10'W Sidewalk LLDA: 1WF2=0.72 DSxw1=0.95 .a ZZ - .. T3S ZZ �w iWF22SOM Pulse, 15' Mounting Ht r T3M (left), ASYDF (right) lenses HS - House -side shields BSW- Bird -deterrent spikes WG-Wireguard VG - Vandal DDL- Diffuseddroplens guard FEATURES & SPECIFICATIONS INTENDED USE The energy savings, long life and easy -to -install design of the D -Series Wall Size 1 make it the smart choice for building -mounted doorway and pathway illumination for nearly any facility. CONSTRUCTION Two-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance. The LED driver is mounted to the door to thermally isolate it from the light engines for low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65). FINISH Exterior parts are protected by a zinc -infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi -stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in textured and non -textured finishes. OPTICS Precision -molded proprietary acrylic lenses provide multiple photometric distributions tailored specifically to building mounted applications. Light engines are available in 3000 K (70 min. CRI), 4000 K (70 min. CRI) or 5000 K (70 min. CRI) configurations. ELECTRICAL Light engine(s) consist of 10 high -efficacy LEDs mounted to a metal -core circuit board to maximize heat dissipation and promote long life (L88/100,000 hrs at 25°C). Class 1 electronic drivers have a power factor >90%, THD <20%, and a minimum 2.5KV surge rating. When ordering the SPD option, a separate surge protection device is installed within the luminaire which meets a minimum Category C Low (per ANSI/IEEE C62.41.2). INSTALLATION Included universal mounting bracket attaches securely to any 4" round or square outlet box for quick and easy installation. Luminaire has a slotted gasket wireway and attaches to the mounting bracket via corrosion -resistant screws. LISTINGS CSA certified to U.S. and Canadian standards. Rated for -40°C minimum ambient. DesignLights Consortium"' (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at wv,w.designlights.org/QPL to confirm which versions are qualified. WARRANTY Five-year limited warranty. Complete warranty terms located at: \-ANry^t.3cuity-brands.com/resources/terms-and-candifions Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. 0FA,UrfVVJV1 One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • www.lithonia-com DSXW1-LED LA7AZ7Z1VA9. 0 2013-2019 Acuity Brands Lighting, Inc. All rights reserved. Rev. 3/06/19 (1) CL M 0 0 0 pre, ca E W-4w=T.=M cr) 0 0